Solid 1.25 percent silver conductors eliminate strand-interaction distortion and reduce jitter | Any solid material adjacent to a conductor is actually part of an imperfect circuit | With carbon-based metal-layer Noise-Dissipation System 100 percent shield coverage is easy | Features double-balanced geometry electrically separate shield better preserves integrity of the negative conductor | Cold-welded hanging-silver directly over the pure red copper system this plug design enables a perfect heat-free connection between cable and plug

Solid 1.25% silver conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated copper conductors are excellent for very high-frequency applications. These signals being such a high frequency travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver the performance is very close to that of a solid silver cable. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. All of Boxers conductors use PE air-tube insulation because air absorbs next to no energy and polyethylene is low-loss and has a benign distortion profile. PE air-tube insulation causes much less of the out-of-focus effect common to other materials. Carbon-based 3-layer Noise-Dissipation System (NDS) prevents captured RF interference from modulating the equipments ground reference. Metal and carbon-loaded synthetics prevent most RFI from reaching the equipments ground plane.